Browse by Brand
|
Browse by Brand
|
Used By:
Commercial Artists
Modelers
Hobbyists
Graphic Designers
Illustrators
Product Highlights…
* Features large 20" x 25 " (51 x 64 cm) work area to accommodate flat or 3-D objects up to 18" x 23", while fitting comfortable on a counter top.
* Powerful 2-speed fan and 4-stage dual carbon filter system ensure a cleaner and safer work environment.
* An external exhaust adapter (item #225-329) is available for venting out-of-doors.
* Filter housing adjusts from 0° to 45° for the most suitable angle for even spraying.
* Replaceable filters and spray guard hood
* Highly efficient
* Variable airflow:
. . . High Speed - 365 CFM
. . . Low Speed - 200 CFM
* Width: 25"
* Depth: 22"
* Height: 25"
* Weight: 45 lbs.
* Electrical: 115V, 85-watts
Features Four-Stage Filter Design:
1st Stage:
2nd Stage: Under the pre-filter is a 1" thick non-woven polyester air-laid material with a blue PVC binder on the exit side. This material, unlike fiberglass, is non-toxic, will not migrate on the air exit side and offers excellent filtration.
3rd Stage: A carbon-impregnated polyester (poly-carb) offering high odor and further particle-trapping efficiency.
4th Stage: This filter consists of a high-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media. Together, they provide further odor and fume-removing properties as well as particle-filtering characteristics. Filter contained in a metal frame.
Available Accessories & Replacement Filters …
#225-329 Exhaust Adapter
This exhaust adapter attaches to the spray booth exhaust ports to direct air outside to another area.
Note: 2 standard 4-inch diameter dryer hoses are required for operation (one for each port).
#200-575 Replacement Spray Guard Hood
Corrugated spray guard hood keeps work area clean. Keep your Spray-System looking new.
#225-326 Pre-Filter Roll (25" x 50 yards)
Unique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter through the attached cutting bar, and tear off like a paper towel dispenser. 25" x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.
#225-327 Filter Pak (4 ea. mid-filter & polly-carb pads)
4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a blue PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency.
Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.
#225-328 Activated Carbon Filter
High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media. (50% fill) Should be replace approximately every six months to a year depending on usage.
#225-330 High Efficiency Activated Carbon Filter
High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media (100% fill). Offers twice the efficiency and more odor removal than the standard activated carbon filter (#225-328). Should be replaced approximately every six months to a year depending on usage.
Artograph Graphic Spray Booth
$899.99 $809.99 On Sale!
#25 Pre-filter Roll 25"x50 yd (AG225-326) $59.99
#25 Filter & Pads (AG225-327) $79.99
#25 Activated Carbon Filter $79.99
#25 High Effecency Actv Car Fl $99.99
2025 Replacement Hood $29.99
Exhaust Adapter . SO $59.95
Adhesives
Airbrushes
Artboxes
Books
Brushes
Canvas
Cardboard
Children
Colors
Crafts
Drafting
Furniture
Picture Frames
Graphic Arts
Knives & Cutters
Pads
Paint By Number
Palettes
Paper
Pens
Pencils
Portfolios
Printmaking
Sculpture
Browse by Brand
Overstock
About Us
Employment Opportunities
ViewCart
in the central and western U.S.